These rulers are "L" shaped with both legs being of equal length. The 90 Degree Ruler is marked in 1/2" increments from 0 to 9" on each leg. The 90 Degree Jr. is 0 to 5". Markings are also included down the length of each leg to enable the user to stitch parallel lines at 1" and 1 1/2" intervals from the inside or outside edge of the ruler.

The 90 Degree Ruler is useful for large blocks and or borders. The 90 Degree Jr. is easier to use with smaller blocks.

Instructions are included.

Use these rulers to:

• Stitch 1" or 1 1/2" grids (vertical and horizontal lines) in blocks and borders without marking.
• Stitch "V's" or "L's" in blocks or borders.
• Stitch In the Ditch or Outline 90 degree angles and triangles.  (Donita uses this ruler most everyday for Stitch in the Ditch).

90 Degree Jr

The 90 Degree Ruler is shown here being used for Stitching-in-the-Ditch of a large block. This ruler can be used for outlining as well.

For smaller blocks or units of blocks,

use the 90 Degree Ruler Jr. (not shown).